Description
Description:
When the Pump Control Valve is in the Closed or “Casing Tong” position, the pump automatically transitions from approximately 1,100 PSI @ 50 GPM (75.8 Bar @ 189.3 LPM) to approximately 2,000 PSI @ 25 GPM (138 Bar @ 94.6
LPM). In the Open or “Tubing Tong” position, only one of the (two tandem) pump sections is active and flow is restricted to 25 GPM (94.6 LPM) at all pressures.
Features:
-
480VAC, 60Hz 3-phase 60HP (380VAC, 50Hz 50HP) explosion-proof electric motor
-
90 gal (340 L) hydraulic oil reservoir (w/suction & return filters; two(2) thermostatically-controlled immersion heaters (for cold weather); locking ball valve)
-
Explosion-proof junction box (w/Breaker; O/L relay; Start/Stop push buttons)
-
Hydraulic oil cooler
-
Remote Start/Stop station w/100′ (30m) cable for installation near Driller’s console for Emergency shutdown
-
Fully enclosed unit mounted on oilfield-type skid w/hose rack & 4 lifting points (pull tested & mag inspected with certs)
-
Two-stage hydraulic pump (w/relief & unloader valves; check valve; pressure gauge)
-
100′ (30m) power cable “pig tail” to connect to electrical source (SOOW 4/2)
Maximum flow rates:
- High Flow: 1,100 PSI @ 52 GPM (76 Bar @ 196.8 LPM)
- Low Flow: 2,500 PSI @ 25 GPM (172.4 Bar @ 94.6 LPM)
- Maximum pressure (relief valve setting): 2,500 PSI (172.4 Bar)
Dimensions (Approx.):
- Length: 90″ (2,286 mm)
- Width: 50″ (1,270 mm)
- Heigth: 54″ (1,371.6 mm)
- Weight (approx): 4,000 lbs (1814.37 Kg)
Options:
- HPU-026W “Warm Climate” Unit (w/o immersion heaters and side panels)

